Podcasting since 2005! Listen to Latest SolderSmoke

Tuesday, May 31, 2016

NP0 Is the Way to Go!

Much to the consternation of Pete "Digi" Juliano, I have been working on analog LC VFOs for simple superhet receivers.   As described in earlier posts, I recently converted an old Barebones CW superhet to 40 meter SSB.   At first, the VFO (2 -2.3 MHz) was not stable enough -- it would slowly drift in frequency. ("We have a solution for that," chuckled Pete.)   My first effort at stabilization involved replacing the toroidal coil.  The material in the core is sensitive to temperature changes and this can lead to instability.  I found my traditional cardboard tube from a coat hanger, and made a coil of the needed inductance (you can see it in the pictures).  This yielded some improvement in stability, but it was still drifting.  

Next I tried taking out all the silver mica and disc ceramic caps in the LC circuit of the oscillator and replacing them with NP0 ceramic caps.  The feedback caps are in the box below the tuning cap, but you can see some of the little NP0s on the outside of the box, connected to a rotary switch.  This serves as the equivalent of variable "Bandset" variable cap, with the tuning cap serving as the "Bandspread."  I have seven switch positions, each covering about 40 KHz (with some overlap).  This gives me all of the phone band and the bottom 30 kHz of the CW band.  

Switching to NP0 caps really did the trick.  The receiver is now very stable. When I told Farhan about my VFO woes, he mentioned that he'd had very good stability results with surface mount caps.  I wonder if this success has more to do with those caps being NP0 than with their surface mount configuration.  

Here is a good description of NP0:


NP0 Ceramic Capacitors are single-layer ceramic capacitors made from a mixture of titanates.
A NP0 ceramic capcitor is an ultrastable or temperature compensating capacitor. It is one of the most highly stable capacitors. It has very predictable temperature coefficients (TCs) and, in general, does not age with time. 
NP0 stands for negative-positive 0 ppm/°C, meaning that for negative or positive shifts in temperature, the capacitance changes 0 part per million, meaning that it has a flat response across a wide range of temperatures; the capacitance of the NP0 capacitor stays constant (at the same value) despite variations in temperature.  

From: http://www.learningaboutelectronics.com/Articles/What-is-a-NPO-ceramic-capacitor

But I think it is a stretch to claim that these marvelous caps do not "age with time!"  That would be a really astounding property of the titanium dielectric.  That would be a Negative-Positive Zero FLUX capacitor, right?


Monday, May 30, 2016

Movie Review: "The Man Who Knew Infinity" FIVE SOLDERING IRONS



My wife and I went to see this flick about the mathematician Srinivasa Ramanujan.  It was filmed at Trinity College, Cambridge -- if you look at the dedication to "SolderSmoke -- Global Adventures in Wireless Electronics" you will see a picture of my kids at Cambridge.  Alas, that picture was taken at Kings College, not Trinity;  nonetheless, the Cambridge connection got us interested.  Then there was the Indian aspect of the story, which is very intriguing.  There was also the "amateur makes good" angle that all of us should, I think, find very encouraging.

The movie did not disappoint.  We really liked it.  The presentation of the cultural clash was very well done.  Elisa told me that as she watched Ramanujan struggle with England,  she found herself wanting to tell him,  "You are just going through culture shock.  Be patient!  I've been through this many times!" They included just enough math to give the viewer a sense of what Ramanujan was working on. 

I got a real kick out of one scene in which old Professor Hardy, seeking to motivate young Ramanujan, took him into the Wren Library and showed him the manuscript of Newton's Principia. I had seen the same manuscript in the library of the Royal Society in London -- they had take it out on the occasion of the visit to the library of Stephen Hawking and NASA Director Mike Griffin.  They also had on the table the reflecting telescope that Newton himself had made.   That was quite a day.

Great movie.   I give it the coveted rating of five soldering irons.     

More about Ramanujan here:
https://en.wikipedia.org/wiki/Srinivasa_Ramanujan

Sunday, May 29, 2016

Great "QSO Today" Interview with H.P. Friedrichs AC7ZL -- "My nature is to build."


Eric 4Z1UG has a really wonderful interview with H.P. "Pete" Friedrichs AC7ZL.   Pete is the author of "The Voice of the Crystal" and "Instruments of Amplification."

I sat in the shack this morning with a cup of coffee, mesmerized by the things Pete was saying.  I actually took notes.  Some highlights:

-- In describing his zeal to avoid the use of store-bought components, Pete acknowledged that there are limits to this.  But then he revealed that his limits are different than those of even the most fundamentalist of homebrew fundamentalists:  "Well, I'm not going to mine my own copper."  Don't worry Pete -- no one will call you an appliance operator if you use store bought wire.  

-- On the same subject, when describing his homebrew diodes for crystal radios, Eric asked Pete why he didn't just go out and buy a Germanium Diode.  "That would be cheating," replied Pete.  Indeed.

-- "Obsolete technology often gets short shrift."

--"My nature is to build."

Check out the podcast here:

http://www.qsotoday.com/podcasts/ac7zl

Saturday, May 28, 2016

HOMEBREW HERO: REX HARPER W1REX AND THE WORLD'S BIGGEST BUILD-A-THON

Rex, shortly before questioning by authorities
Wow, Rex Harper W1REX deserves some sort of big award.  I hereby grant him the coveted Brass Figlagee with Bronze Oak Leaf Palm, but that is clearly not enough.  Rex spent a month of 20 hour days putting together kits for the Four Days in May QRP event at the Dayton Hamvention.   The results were spectacular:  246 hams succeeded in building QRP transmitters, and they all did it in under 70 minutes.   

Just as impressive as the results were the ways in which Rex overcame the technical and organizational hurdles prior to the event.  You can read all about this in Rex's excellent write up:
http://www.qrpme.com/docs/FDIM%202016%20Report.pdf

The OFFICIAL SolderSmoke Correspondent at Dayton was once again our friend Bob Crane, W8SX.  Bob caught up with Rex and somehow managed to get him to stand still long enough to do this interview:

http://soldersmoke.com/W1REXDaytonInterview.mp3

And it was very nice that Rex did this as a tribute to Dave Ingram K4WTJ whose magazine articles about simple QRP rigs inspired many of us.  Years ago, right after completing a homebrew QRP transceiver, I talked to Dave on 30 meter CW and told him that his articles had helped motivate me to build. 

Finally, no SolderSmoke post about Rex would be complete without a repetition of the video showing him transferring the prodigious mojo of the original Tuna Tin Two into my BITX-17 transceiver.

Friday, May 27, 2016

Pete's Beautiful New Blue Rig


A thing of beauty.  

Read about it here:   http://n6qw.blogspot.com/

Thursday, May 26, 2016

Listening to New Zealand on the Barbados RX via the Gray Line (40 meter CW)


John: 
For the last couple of mornings you have been coming in quite strong on 40 meters around dawn here.    Attached is a short video from today.  I am listening with a homebrew superhet receiver:
73  Bill N2CQR

Hi Bill,
Thanks for sending the video clip.
It’s really made my day!
I’ve sometimes wonder what I sound like at DX now I know.
The IC7410 sounds quite respectable and the sending is reasonably decipherable.
Interesting about the receiver.
The signal seems to stand out well from the noise.
Really well done. But then that’s what ham radio is all about.
We all enjoy radio and  we all like to enjoy the various aspects to the hobby.
Modes, antennas ,QRP whatever.
It’s great fun.
It would be good to have a QSO. perhaps some time soon?

Thanks again,

Very Best 73,
 John ZL1ALA

Wednesday, May 25, 2016

Swedish Michigan Mighty Mite Beacon Project


sTef DL1FDF/VY1QRP alerted us to this multi-band Michigan Mighty Mite beacon project out of Sweden. They certainly have some fine looking rigs! 

Check out the reports:
http://www.radiorud.se/fyren.php






Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column