Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Norway. Show all posts
Showing posts with label Norway. Show all posts

Sunday, April 23, 2023

Helge LA6NCA's Altoids Tin Receiver


Here's another great video from Helge LA6NCA.  This is a follow-up to his Altoids Spy Transmitter project.   Really well done.   Hack-A-Day called this receiver "regenerative" so naturally I was disappointed, but when I watched I realized that it is NOT a regen but is instead a direct conversion receiver.  TRGHS.  All is right with the world.  Thanks Helge!  73 

Thursday, April 6, 2023

Helge LA6NCA Builds a Double Sideband Thermatron Transmitter


Helge is an amazing homebrewer. Check out the shack.  Note the R-390 and the Tek 'scope.  Watch how Helge designs his rig.  Watch him check the 3-D printed coil and the variable caps for resonance.  Most of all, watch his happiness when the new transmitter works.  I just wish he would have showed us some OM complaining that he was on the "wrong" sideband. FB Helge!  Thanks. 

Monday, August 8, 2022

Polyakov (RA3AAE) Direct Conversion Receiver: 40 meter DC RX with VFO at 3.5 - 3.6 MHz (with video)

I've been reading about Polyakov (or "sub-harmonic") Detectors for a long time: 

https://soldersmoke.blogspot.com/search/label/Polyakov--Vladimir

But until now, I never built one.  Recently,  Dean KK4DAS and the Vienna Wireless Makers group have been building a Direct Conversion receiver.  Their receiver uses an Si5351 as the VFO, but of course Dean and I have decided to try to do things the hard way by building non-digital VFOs.  At first we just came to the conclusion that my earlier Ceramic Resonator VFO wasn't much good (it drifted too much).  This led us into standard Colpitts and Armstrong VFOs, and the fascinating world of temperature compensation.  Then I remembered the Polyakov circuit -- this would allow us to use a 3.5 MHz VFO on the 7 MHz band.  Lower frequency VFOs are easier to stabilize, so I started building my first Polyakov receiver.  You can see the results (on 40 meters) in the video above. 

I started working with a circuit from SPRAT 110 (Spring 2002). Rudi Burse DK2RS built a Polyakov receiver for 80 and 40 that he called the Lauser Plus.  (Lauser means "young rascal" or "imp" in German.) For the AF amplifier, I just attached one of those cheap LM386 boards that you can get on the internet.  With it, I sometimes use some old Iphone headphones, or an amplified computer speaker. 

The Polyakov mixer is a "switching mixer."  The book excerpt below shows how I understand these circuits.  The enlightenment came from the Summer 1999 issue of SPRAT (click on the excerpt for an easier read): 


Leon's circuit shows us how a simple switching circuit in which the switches are controlled by the VFO can result in an output that has the sum and difference components. That is the hallmark (and most useful part) of real mixing.  Remember -- we say that mixing happens in non-linear circuits when the passage of one signal depends on what is happening with the other signal.  A switch is as non-linear as you can get! And that switch is being controlled by the VFO.  

In a Direct Conversion receiver we usually run the VFO at the operating frequency. This results in audio just above and just below the operating frequency. 

The Polyakov Direct Conversion circuit is a bit different.  It has the switches (the diodes)  turned on twice each cycle:  When the VFO voltage goes to a positive peak, this turns on one of the diodes.  When the VFO goes to a negative peak, this turns on the other diode.   So in effect the switch is being turned on TWICE each cycle.  So with the Polyakov you run the VFO at HALF the operating frequency.  For a DC receiver designed to run around 7.060 MHz, you build a VFO at around 3.53 MHz.  This has some immediate advantages.  My favorite is that it is easier to get a VFO stable at a lower frequency.  It is easier to stabilize a VFO at 3.53 MHz than it is at 7.060 MHz. 

When you open that SW 1 switch in the Lauser Plus, you no longer have a Polyakov mixer.  Now you just have a diode mixer.   It will be opening and closing once each cycle at the VFO frequency.  DK2RS used this to cover not only the 40 meter band (in Polyakov mode) but also the 80 meter band (in single diode detector mode).  That is why DK2RS has that big variable capacitor in the input circuit -- that LC circuit needs to tune all the way down to 3.5 MHz and all the way up to around 7.3 MHz.  (I used a coil of about 6.5 uH to do this.) 

With just one diode and operating at 80 meters, it works, but not as well as it does in the Polyakov mode on 40.  I can pick up 80 meter signals, but in this mode there seems to be more of an "AM breakthrough" problem. "Experimental Methods in RF Design" on page 8.11  describes what is going on (the last sentence is most relevant here): 

Here are some very good links with information on the Polyakov receiver: 



LA8AK SK: http://www.agder.net/la8ak/   Almost seventeen years after his death he continues to help his fellow radio amateurs through his web sites.  TNX OM!  FB! 



I will post a video tomorrow showing the receiver in operation on 80 meters.  

Three cheers for Vlad Polyakov, RA3AAE

Monday, February 28, 2022

LA6NCA Designs and Builds a Very Hybrid 80 Meter Transmitter (Si5351 and a 12A6 Tube) (Video)


Helge LA6NCA put out a really nice video explaining how he designed and built an 80 meter transmitter. 

I like how he put the Si5351 and the Arduino chip in what looks like a slightly expanded FT-241 crystal box.  Nice.  

I like the box and the chassis.  

I like his testing/tuning technique.  

The homebrew capacitor was a very nice touch.  

Where can I get some of those coil forms?  

And of course, the R-390 receiver adds a lot of mojo to the shack. 

Helge's web sites document an enormous number of great projects:  

Helge's page on the 12A6/Si5351 transmitter: https://www.la6nca.net/homebrew/tx_12a6/index.htm


Thank you Helge! And thanks to Hack-A-Day for alerting us to this. 

Monday, February 22, 2021

LA6NCA's German Military WWII Receivers, and a Luftwaffe Receiver with FAST QSY


Discussions of old military radio gear are dominated by talk of U.S. radios.   Yesterday in the comments section of the SWLing Post I found two interesting videos about German WWII equipment.  Above you can see LA6NCA's receivers.  Below there's a video of a Luftwaffe receiver with an amazing capacity for really rapid frequency change.  

Friday, August 14, 2020

Tor LB4RG Builds an IRF-510 Amplifier


Click on the link to check out Tor's very FB and artistic video about his homebrew IRF-510 amplifier. 

Very Nice.   Also, check out Tor's FB SolderSmoke hat.  

https://gopro.com/v/bQ1JGOXRrRqrQ

And here is an update from Tor" 

https://gopro.com/v/gv19pDDqQnO1a

Sunday, February 25, 2018

Soldering Fingers (and SWR Bridges) in Norway



Tore BonderudtÃ¥jet LB4RG tells us that he is a SolderSmoke listener, and that the old tradition of hams soldering their fingers together continues to be practiced in Norway.   Here are some pictures of his latest efforts.  This is an SWR bridge project.  Thanks Tore!  Careful with the fingers OM! 







Sunday, October 11, 2015

The Amazing History of the Gibson Girl Rescue Radio

 
A video about the Kon-Tiki expedition got us wondering about how you could generate hydrogen gas for an antenna balloon while on a raft at sea. (That's the kind of question that keeps Knack victims up at night.)  This led us to the Gibson Girl rescue radio.  This morning I found a fascinating web site that gives the long, multi-country history of the curvaceous rescue rig: 
 

Thursday, September 10, 2015

Kon-Tiki and the Gibson Girl



Back in July we shared a very nice video sent to us by Rupert G6HVY on the radios used by the Kon-Tiki expedition.  Many of us had questions about the device used by the intrepid radio operator to generate hydrogen gas (for the antenna balloon) while on the high seas.   Mike Herr WA6ARA supplied the answer:   1200 grams of Calcium Hydride crystals.  This was part of the WWII rescue  radio set CRT-3 (aka the Gibson Girl). 

Fair Radio Sales occasionally sells this intriguing device: 
https://www.fairradio.com/catalog.php?mode=search&keywords=hydrogen&submit.x=21&submit.y=8

And here is great site with more details on the other antenna supports in the Gibson Girl set, including a ROCKET LAUNCHED KITE! 

https://billboyheritagesurvey.wordpress.com/2012/01/17/war-kite-the-gibson-girl-kites/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, July 24, 2015

Ham Radio on the Kon-Tiki



Hi Bill
Just found a short Youtube QRP video which is quite fun. It's of the radio side of  Thor Heyerdahl's cross-Pacific Kon-Tiki raft expedition in 1947, operating /MM with 7 watts. I found a longer description of what they had and what they did - including a thrilling tale of drying components on coral reefs while they desperately tried to make contact having washed up on an island - but not of the unusual parrot incident with a hydrogen balloon-lofted antenna during the voyage. That's only in the video.
 
It's all gripping adventure radio stuff, and shows what HF and a bunch of tubes could do before the digital satcom age.
 
 
"The expedition used call sign LI2B and carried three watertight radio transmitters. The first operated on the 40 and 20 meters, the second on 10 meters and the third on 6 meters. Each unit was made up entirely of 2E30 vacuum tubes providing 10 W of RF input. As an emergency backup, they also carried a German Mark V transceiver originally re-created by Britain's Special Operations Executive in 1942. Other equipment included a hand-cranked emergency set of the Gibson Girl type for use on the maritime bands, a special VHF set for contacting aircraft and two British Mark II transmitters. The Kon-Tiki also carried a National Radio Company NC-173 receiver. Dry batteries and a hand-cranked generator supplied the power."
73s
Rupert, G6HVY


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, April 20, 2015

Progress! Si5351 VFO/BFO Working

 
I got the Si5351 portion of the new rig going today.  I used an Arduino program from Thomas LA3PNA.  It is relatively barebones, without a lot of bells and whistles, but it does just what I need:   it puts out a fixed BFO frequency and a variable VFO frequency, and displays the resulting transmit frequency.   Thanks Thomas, and thanks to Jason, NT7S, for his work on the Arduino libraries that make this all possible.
 

 
It is very simple:  Just an Arduino Uno with the Si5351 board sitting above it on a proto board that Pete sent me (thanks Pete!).  You can see the rotary encoder on the panel, and the 10K pot to set the brightness of the back-lit display.   I put the Arduino USB port on the front to make it easier to update the software, change the BFO freq. etc.    I'm going to use another cigar box wooden box for this projects, so the VFO/BFO front panel board was sized with that box in mind.  
 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, April 5, 2014

Parachutist's Helmet-Camera Images Falling Meteorite



Just because it is pretty cool.  Also, we like parachutes, meteorites, and Norway.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, August 18, 2013

A COOL Norwegian "S" Meter (video)


Immaterials: Light painting WiFi from Timo on Vimeo.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, December 17, 2011

"The Little Sweetheart" Receiver

Wow, what a beautiful piece of work! And a fascinating story behind it, with hints of wartime romance... Thanks to Mike AA1TJ whose very eclectic reading (Czech tech mags!) led us to this. Thanks also the Crypto Museum. Here is the link:

http://www.cryptomuseum.com/spy/sweetheart/index.htm

With more info here:
http://antiqueradios.com/forums/viewtopic.php?t=96007
And here:
http://antiqueradios.com/forums/viewtopic.php?t=96057


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column