Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Minima. Show all posts
Showing posts with label Minima. Show all posts

Tuesday, November 2, 2021

Farhan's Amazing Knack Story: From a Boyhood SW Receiver to the Design of the sBITX SDR


The presentation starts at about the 4 minute point. 

I think if I were only allowed to watch one YouTube video in the next year, I'd make it this one. 

In this amazing RSGB video, Ashhar Farhan VU2ESE takes us back to his earliest days as a radio amateur.  He tells us about his very early desire to build radios, his early projects, and his personal evolution as a designer and builder,  from a simple DC receiver, to the BITX, the Minima, the uBITX and now the hybrid HDR/SDR sBITX.  

There is a lot of  homebrew wisdom and tribal knowledge in this video. And we learn so many hitherto unknown details about the rigs that have become so important to us:  

-- Farhan had the EMRFD book with him on the famous flight from Sweden to India during which the BITX was designed. 

-- We learn about the origins of the BITX oscillator circuits, and that the VFO and BFO are essentially the same.  

-- I was really pleased that Farhan included a picture of my HB BITX17 rig in his presentation. 

-- Farhan discusses the difficulties he faced in obtaining needed parts in India. 

-- We actually see the nylon washers that Farhan used in the original BITX. 

-- Farhan discusses his early system for measuring coil inductance. 

-- In addition the huge contribution of EMRFD,  Farhan talks about how he was helped by Pat Hawker G3VA's writing, and the ARRL's SSB Handbook. 

-- Farhkan talks about his Tex 465 'scope and his building of a Spectrum Analyzer. 

-- We see his evolution to dual conversion. We see the conceptual birth of the Minima and the birth (thanks Wes!) of the TIA amps.  I didn't know about the HF-1.  Then Farhan designed the uBITX and now the sBITX.  

 -- Farhan talks about his practice of taking the pictures of new rigs with the new rig sitting atop the book that was most important in its design and construction.  FB. 

-- I was really blown away by Farhan's presentation of how the uBITX advertisement was inspired by and in many ways based on the Heathkit ad for an HW-101.  Amazing. 

-- I learned a lot from Farhan's discussion of SDR theory.  I pledge to spend more time with this.  I really like Farhan's hybrid HDR/SDR approach. 

-- But I have a question:  Farhan seems to say that we'd need a big expensive GOOGL computer to do the direct sampling HF SDR.  But doesn't the little RTL-SDR do just that?  Without a GOOGL?  

-- Great to see Wes's AFTIA being used in the sBITX.  

-- Really cool that Farhan has his mind on VHF transverters when designing the sBITX.   I liked use of the TCXO module to free up one of the Si5351 clock outputs.   FB.  And great to include an idea from Hans in this rig. 

Thanks very much to Farhan (who stayed up until 3 am to do this!) and to the RSGB for hosting.

Monday, June 26, 2017

FDIM: Bob Crane Interviews Ashhar Farhan VU2ESE

At Dayton,  Bob Crane interviewed our friend Farhan VU2ESE.  Farhan shared insights on the BITX, the Minima and future rigs. 

Farhan was inducted into the QRP Hall of Fame at this year's FDIM event.

You can listen to the interview here:

http://soldersmoke.com/FDIM17VU2ESE.mp3

Monday, August 1, 2016

Walking the Plank with N8NM's 60 Meter Rig

Steve N8NM writes:

The free-range rig is coming along!  I'm receiving with decent sensitivity (my generator's only calibrated to -100 dB/m, and I hear a CW note there just fine) and I'm getting about -2 dB/m out of the mixer.  Yippee!
I ended up using an IF of 20 MHz, mainly because I had a bunch of crystals left over from my Minima.  The architecture (left to right) is: Diode ring mixer using 1N4148s, 20dB W7ZOI bilateral TIA, 6 pole crystal filter (BW ~= 2.3 KHz), Another 20dB bilateral TIA, 1N4148 product detector (cribbed from the Minima), 2N3904 audio driver, LM380 PA.  Microphone amp is two FET stages (J310).  Oscillators are courtesy of an Si5351, controlled by an Arduino Uno.  T/R switching is done using a couple of counterfeit 2SC1969 RF transistors that, ironically, don't amplify at RF, but work fine as power supply "pass" transistors.
Yet to do is the PA, which I've noodled in LTSPICE (shooting for 20W PEP using a bunch of BD139s, just because...) and cleaning up my Arduino sketch.  Right now, I just modified the start-up values of the sketch from my all-band rig for testing.  Since that code is pretty full featured (dual VFOs, RIT, filter switching, LCD Display, etc.) using multi-function pushbuttons to select all sorts of crap, I'm betting that 80% won't be used in this rig.  Adding simplicity is always good.
So, nearing the end, I'm already thinking about my next rig (that and building a 60m antenna...)  I think this one will be similar to my "all band" rig, but limited to the WARC bands (I have a WARC tribander that's screaming for a rig of it's own.)  That's kind of boring, so, to challenge myself, I'm going to try using a touch screen in lieu of the usual pushbuttons.  What would really be cool, though, is an interactive slide-rule dial - don't think anyone's done that before!  One of the things that has always drawn me to the SX-101 is that large slide-rule dial.  To me, that allows each station to occupy a physical place on the dial, so after scanning the band, you know were everyone is.  It's really a joy to operate those rigs!
73!  Hope to work you HB2HB on 60M soon!
-Steve

Sunday, July 17, 2016

HB2HB QSO with N6ORS -- MIN-X to BITX

That's Keith N6ORS's MIN-X transceiver.  Keith explains that it has circuitry from the BITX, the Minima and even from the ZL2BMI DSB rig.  We featured the MIN-X before, when it was still outside the box:
http://soldersmoke.blogspot.com/2016/01/n6orss-min-x-crosses-pond-on-first.html

I was on twenty today with my BITX, finishing up a rather disheartening contact with a fellow who told me that he is a "checkbook operator." I was trying to encourage this fellow to build something simple -- perhaps a Michigan Mighty Mite?  He told me that he might give it a try, but only 16 years from now, after he retires.  It was like a case of the Anti-Knack!  Then Keith N6ORS saved the day by calling in with his beautiful MIN-X HOMEBREW transceiver.  We had a nice talk -- Keith mentioned the beauty of Pete's "Blue Rig." That's HB2HB (phone) QSO #5 for me.  Thanks Keith! 

Bill,
That was great fun!
I was just tuning around and heard you mentioned the Michigan Mighty Mite
so I stopped to listen and realized it was you!
Well here was my chance for a homebrew to homebrew with 'the man' himself.
I wanted to record it but missed the chance.
Here is the Min-x boxed up. the case is made from thrown away computer cases.
It runs about 70watts on 160,80 and 40 meters and about 35watts on 20 meters.
I promise to write it up, maybe even draw a schematic. hihi.
73,
Keith N6ORS
 

Here' a short clip of the MINX in action:


Sunday, April 3, 2016

Possibly the Best Ham Radio Interview Ever: Farhan on "QSO Today"



Stop what you are doing.  Run -- don't walk -- to the "QSO Today" website of Eric Guth 4Z1UG.   There you will find his interview with Ashhar Farhan VU2ESE

There is so much great information, inspiration and wisdom in this interview.  I was so captivated by it that -- even with the availability of the pause button -- I was unable stop listening even for the time it would take to walk to the kitchen to refill my coffee cup.  But at the same time, listening to Farhan describe the joy of bringing a new receiver into operation compelled me to go over to the bench -- in mid-podcast -- to tweak a receiver that I am working on.

In this podcast you will hear about how Farhan got started in ham radio, about his Elmers about the origins of the BITX, about the Minima and the new HF-1 rig, about Farhan's spectrum analyzer project and about a new goodwill effort to send BITX circuitry to aspiring hams around the world, especially in developing countries.

Throughout you will hear Farhan speak of the importance of the book, Experimental Methods in RF Design. 

I really do think this is the best ham radio interview I have ever heard.  Congratulations and thanks to Eric and Farhan.

Here is the link:

Wednesday, January 6, 2016

N6ORS's Min-X Crosses the Pond on First Contact


Very cool!  Reports on new phone rigs keep coming in.  It is great to see them in their "still out on the bench" condition.  And reports of the first contacts are always exciting.  I like the MIN-X name.  This is indeed another testament to the contributions made to the radio art by our friend Farhan.   

Hello Bill,

Well I  just finished tweaking my new rig, I named it Min-X because I outright stole bits and piecesof the BITX and the Minima, thanks Ashhar. I made my first contact today and what a contact!

The contact was made with the rig as shown. The amp is a home brew FET push-pull.
I had a chat with Beth MW0VOW in South Wales! From Wisconsin to Wales on 15w PEP.
Oh, most of the rig was 'noodled' and constructed while enjoying you and Pete on the
SolderSmoke podcast.

Best 73,
Keith N6ORS





Friday, July 3, 2015

Farhan's ATU (and his new blog!)


Farhan has built a very cool antenna tuner.   More important, it is the subject of the first of what we hope will be many postings on his new VU2ESE blog.   I really like the re-purposed Sony meter, and the homebrew feedline for the multi-band (80-6 meters) doublet.  This is clearly a suitable antenna and tuner for the multiband Minima.  I have been inspired!  I hope to brew up some feedline soon!  No more store-bought transmission line for me! 

VU2ESE Blog:  http://hfsignals.blogspot.com/p/about.html

VU2ESE Tuner Article:  http://hfsignals.blogspot.com/2015/06/a-balanced-tuner.html


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, May 24, 2015

Sage Advice on Homebrewing from WA3EIB


Bill, Pete,
 
Thanks for the sage advice.
 
You are absolutely right, I should stick to the plan and finish the project before tromping off in a different direction.
Anytime I've ever changed designs before I have completed a task, usually results in something far less than expected.
 
The real joy is completing a project and looking back at what was accomplished.
 
My own personal goals for the Minima Transceiver Construction include...
 
1. Build it from SCRATCH - Manhattan Style.
2. Start with modular construction - so that each circuit can be tested, troubleshot and modified in the future.
3. SMA connectors and coax to every stage so, I can divide and conquer the function of all modules.
4. Document the entire journey so I can actually see where my learning's took me.
5. Provide myself, a basic building block for future transceiver construction and designs.
6. Improve my skills, techniques and knowledge through my mistakes and understandings. 
7. Learn to SLOW DOWN, study, plan and write, in my own words, what the circuit(s) do and how they function.
8. Be a mentor to others and share what I have learned.
9. Be more of an Amateur Radio Experimenter and less of a Ham Radio Operator.
10. Continue to dream and design.
 
Each day should be NEW and EXCITING. There should be a thrill in every step of the way, even in the midst of failures.
 
Thank you both for taking the time to respond.
Thanks for the encouragement and sharing what happens on your own bench.
 
73's
 
Harv -=WA3EIB=-


---------------------

More inspiration from Harv here:
http://soldersmoke.blogspot.com/2012/09/an-ode-to-old-time-radio-by-wa3eib.html

And here:

http://soldersmoke.blogspot.com/search?q=WA3EIB

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, October 22, 2014

"Two guys and a Minima walk into a bar..."


Thomas, KK6AHT, was in Washington this week.  He and I got together for a beer and a look at his Minima. 


I'd seen pictures of it, but it was much more impressive in person.  Thomas did a great job on this rig.  It is a really nice mixture of digital and analog.  I liked the fact that he built the analog portion Manhattan style using MePads.  He and I agreed that while it would make sense to produce a PC board for the Arduino/Si570/LCD portion of the rig, builders should be encouraged to do the rest Manhattan style. 


Showing true homebrew dedication,  Thomas was unhappy with the level of audio output when we turned it on.  He started to trouble-shoot right there in the Ruby Tuesday bar! 


It turns out that we were in a very Knack-ish location.  We were on the site where they created ARPANET. 

Thomas very kindly left me with a nice package of Minima digi-parts including the Arduino chip loaded with the software and an SI570.    So now I have no excuse.  

Thanks Thomas! 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, October 13, 2014

Thomas KK6AHT's Pacificon Minima Presentation: Noodling! And Maxima Inspiration!



Wow, the Minima presentation by Thomas at Pacificon was really great.   I think he had exactly the right tone and tech level for the digitally-savvy California audience.  His very open description of the ups and downs of his Minima build will surely lure in some new builders, and will at the same time prepare them for the travails ahead!  Great stuff.  I like the mention of Pete's "noodling."  Thomas obviously gets it.  And he obviously has THE KNACK.  Thanks Thomas!  

Thomas has posted his slides and (MOST IMPORTANT) the audio of his presentation.  Just click on the BIG ORANGE play arrow below the slides.  You folks will love this: 

http://www.sarfata.org/2014/10/Minima-Presentation-at-Pacificon/



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, September 29, 2014

Don't miss Thomas and his Minima at Pacificon!


Thanks for the kind words Thomas.  Be sure to have someone do a video of your presentation.

You truly have The Knack -- proof of this is your reaction to your wife's departure for field research in Senegal:  "IT'S SOLDER TIME!"  That's the spirit! 

Too bad about the chickens, but hey, they died for a good cause... 


Dear Bill,

I have been listening to your podcast for about a year now. I think you were right to say that one episode a month is a reasonable limit to avoid listeners getting addicted. At some point in January I was listening to you every morning and every evening in my car, a very serious case of addiction.

This is also the time that Farhan chose to announce the Minima and my wife to go to Senegal for 3 months for a field study (she is doing a PhD in Sociology). I think it took me less than a week to run to the shop, get most of the parts and start melting solder!

In two weeks from today I will present the project and my build at Pacificon. I would really appreciate if you could mention this on your blog because I am sure there are other listeners who will be there and curious for some homebrewing-materials. I hope to delight them!

For your own pleasure there are some pictures and videos on my blog: http://www.sarfata.org/ham/minima/ 

Pacificon Schedule:  http://pacificon.org/ (My talk will be at 10:45 in the Portland room)

My presentation will retrace my journey building the minima. From the first smokes on the crystal filter when I was not even sure how to test it, or what results to look for ; to the amplifier where I am still battling some oscillations (by the way, if you had not talked so much about them, I would never have understood what was going on!).

This project has taught me that radio is a lot less black magic than I thought. It bridged the gap between the maths that I can understand but not really "see" and the sound coming out of the amplifier. It made me realize that once split into stages, a radio is much better understood and testable. Without a doubt, this has been my most ham-enriching experience and I hope to convince more people to build a minima, preferably Manhattan style! 

(In this public setting, I will probably not discuss killing chickens to exorcize my amplifier but I thank you for the tip ...)

I got pulled back from homebrewing by life and work this summer but I kept the last three episodes of Soldersmoke on my phone. They were my safety parachute and I listened to them last week on the way home to give me the extra boost that gets me to melt solder or fix bugs until 3 in the morning on a tuesday. I don't think I will ever be able to express my gratitude for all that I have learnt reading the book and listening to you but I would like to start here: Thank you!

Please keep the podcast going! I have really enjoyed the new format with Pete. 

73,
thomas
kk6aht / f4hdq


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, July 15, 2014

VK2SJA's Minima in a Realistic DX-100 Case


Steve, VK2SJA, is doing to a Realistic DX-100 what I have been thinking about doing to a Heathkit HW-101.   With this kind of encouragement, who could blame me for making a Minima-101?  I've been planning on keeping the 6146s and all the final (and perhaps driver) circuitry.    

Here is Steve's very nice description of his project thus far:

http://www.hfsignals.org/index.php/UnRealistic_Minima

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, July 12, 2014

Thomas's Magnificent Minima


Wow, Thomas's page makes me really want to build a Minima.  Note the Manhattan style with Rex Harper's Me-Pads.  Excellent.   Thomas provides a really great stage-by-stage description of the project with the kind of candid descriptions of mistakes that SolderSmoke listeners are so fond of!  


http://www.sarfata.org/ham/minima/

Thomas himself has an interesting "international brotherhood"  personal history:

http://www.sarfata.org/about.html



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, May 31, 2014

Harv's Minima

Good Evening Bill & fellow Solder-smoke friends,
 
Well, I’m following the pack. I began gathering items for the Minima Transceiver back in March 14. There had been a good bit of strong back-N-forth discussions on the Minima Blog about what works and what doesn’t work. Some circuit refinements had been agreed upon while other were left to individual preferences. So, I decided to just be silent an learn from the experts. As a result, I did several months of observing before I took the plunge. While my efforts are not nearly as aggressive as others, I decided to forge a much slower path to success.
In my own quirky way of doing things, I kitted each module, measured all the parts statically, laid out the components, and finally built & tested each assembly before going to the next.
As a result, the learning’s were great and the performance of each section equal or better than my expectations.
 
I went the Manhattan Style this time but,  I have purchased several sets of Minima PCBs to use in the future. As I see it, there is a lot more solder melting ahead.
 
Bill, building radios is NOT DEAD yet. That desire to get back to the golden days of home-brewing still lives on.
 
At the end of the Memorial Weekend, this is my current Minima progress…
 
·         Construction of all 3 Audio Stages now complete (see photos)
·         The Microphone Pre-Amp is now awaiting voice testing
·         Audio Amplifier and Final Amplifier have been tested together
·         The results of audio testing has been superb for all stages thus far
·         3 complete sets of Micro Relays have been order and I’m now awaiting their arrival
·         24 – various ferrite and powered iron cores arrived several weeks ago, these are the heart of the front-end RX/TX stages
·         100 - 20 Mhz. crystals have arrived and await characterization
·         25 - 8” Male to Male SMA Cables have arrived this weekend, will need to order 15 – 4” Male to Male SMA Cable Assemblies next
·         5 – 12” X 15” Copper Clad Boards have arrived this weekend
·         25 –J310 N-channel J RF Power FETs were ordered and arrived this weekend, these are used in the Mixer Stage
 
 
Final Audio Stage
 
 
Audio Amplifier Stage
 
 
Microphone Pre-Amplifier Stage (see microphone connector mounted at rear)
 
I’m ready to begin kitting the Side Tone Oscillator and RX/TX Relay Stages.
The largest and most intense modules are yet to be tackled.
The Bi-Directional Amplifier has 34 parts alone.  So far I have installed over 40 parts in the three modules I’ve completed…
I realize it is just a start but, I’m motivated to see this one project through to completion.
 
73’s & Happy Soldering
 
Harv -=WA3EIB=-
Albuquerque, NM.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, March 29, 2014

Harv's DDS Function Generator


Nice looking DDS function generator Harv!  Glad to see the HT-37 in the background. (And it appears well protected -- is that some sort of digital shielding to protect it from the bits and bytes?) The eraser buttons are a nice touch. Good luck with the Minima!

Hi Bill,
 
Well I have nearly completed my DDS Function Generator as I prepare to construct the Minima.
 
The Function Generator was a necessity for the bench so I can tackle Tweaking and Troubleshooting my work.
It is housed an aluminum box and completely self-contained.
My objective was to have the choice, to either lay the unit flat on the work surface or stand it on a shelf for easy reading while seated.
The Generator has both a  DDS and HF-ECG output.
The buttons are fashioned from White Pencil Erasers since finding proper buttons for the membrane keypad beneath was difficult.
 
I have obtained a set of Farhan’s Boards for the Minima but will begin my effort with a Manhattan Style Construction so I can perfect my choice of parts.
The soldering iron is heating and I’m ready for a new and exciting challenge.
 
Happy Solder Melting Everyone!
 
Harv -=WA3EIB=-
Albq., NM.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, March 14, 2014

Farhan's RM386 RF Amplifier

An RF amplifier inspired by a quest for an AF replacement for the LM386.  I like it!  Check it out:

http://www.hfsignals.org/index.php/RF386


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, January 31, 2014

G0MGX's Minima



Wow, Mark didn't waste any time in building his Minima. FB OM.   His web site has a lot of good info on this project:  http://g0mgx.blogspot.co.uk/


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column