Re: Central Electronics 100V Opposite Sideband Supression Adjustment
-
Chris,
I use a dual trace scope with these phasing type exciters to adjust the RF
network phase shift, it makes it much simpler than dealing with the
inte...
2 hours ago
A word of caution regarding backlight power connections: Not all LCDs have on-board current limiting for the backlight LED(s). Some are wired directly to the anode and cathode of the LED(s). Connecting +5V as shown in this video may well destroy the backlight. Following the traces from the connector to the LED(s) is usually easy and will tell you if you do or do not need an external current limiting resistor.
ReplyDelete