Listen to Latest SolderSmoke Podcast

Friday, April 1, 2016

A Major Change For SolderSmoke: Introducing the WireWrapRap Podcast!


A New Direction for SolderSmoke
Introducing Our New Podcast:  “WireWrapRap”


Attentive listeners have probably noticed that for some time now the podcast has been drifting in a new direction.  Some have been concerned by this change.  I myself, as you know, have shared in many of these misgivings.   But I have become convinced that it is time for a major change in direction.  We've been doing this for more than ten years -- we are one of the oldest ham radio podcasts.  It is time for a change.
A number of people have encouraged me to make to this change.   My co-host Pete Juliano N6QW is clearly the main influence.  Pete has made me see the errors of my Ludite ways.  He taught me that it is time to put away the Dymo tape and get with it with glowing numerals.  Whenever I started getting enthused about VXOs or about Permeability Tuned Oscillators using brass screws moving through hand-wound coils, Pete was there to remind me of the beauty, simplicity, and efficiency of Arduino Microcontrollers and Si5351 chips.   Paul Darlington M0XPD contributed an element of old world legitimacy to this push for modernity. Tom Hall AK2B was another influence -- whenever I was on the verge of quitting, he’d Skype in from the Big Apple and get me back on the digital track.  And we can’t forget Farhan over in India – as soon as he started putting Arduinos and Si570s in his Minima, I knew this was really, as the kids say, “a thing.”
So anyway, it is time for a change.    I know many of you may find this shocking, so it is probably best for me to just go ahead and say it:  We are changing the name of the podcast and we are changing its focus.
n  Instead of SolderSmoke, the new name will be “WireWrapRap.”   Wire wrap is the solder-less wiring technique often used in computer circuitry.  We hope that the “Rap” thing will be especially helpful in attracting young people – especially those Maker Millennials -- to the show.  And, you know, soldering just seems so 20th century.     

n  Instead of traditional homebrew radio, the show will be focused on Mini Computers (especially the Raspberry Pi), Software Defined Radio, Digital Signal Processing, Microcontrollers (especially the Arduino), and the use of smart phones in ham radio
n  Obviously this implies a move away from minimalist radio and QRP.  So yes, we are going maximalist and we are going QRO. And we are getting more involved in contesting (see below).  

Now I know what some of you are thinking – that this must be part of our long-standing quest for sponsorship and that this is all about money.  But that’s only part of it.  Yes, we have secured a lucrative sponsorship arrangement with a company involved in microcontrollers, small computers and smart phones that is focused on the millennial market.  But we’re really doing this for the good of our listeners. 
Don’t worry, you will find many of your favorite parts of SolderSmoke in the new show.  They will be the same, only different.   For example, instead of the “Bandsweep” segments that we used to do, now we are going to have “Codesweep”  (and it’s not about Morse).  Where we used to have SolderSmoke Mailbag, well, don’t worry -- we are going to continue to have a segment that will allow for listener input.  We going to call it “Pi Hole.”  We’ll only be accepting listener input via TEXT messages or Tweets – we are, after all, trying to be modern.  Along the same lines, we will be distributing the podcast exclusively via Soundcloud.  So get with it gentlemen! Get into the cloud!
In the new and improved podcast we want to explore the new and exciting digital modes.  We plan segments on all the new ones: PSK-99, Opera, WSPR, SNICKR, Throb, Thor, Piccolo, Oreo, Oregano,  you know, all those weird sounds you’ve been hearing near what used to be considered the CW portion of the band.  It will be such fun!  I can’t wait to decode some Oregano!
Smart phones, are, of course, the future of ham radio, and we intend to be fully into those little magic boxes.  I don’t know if you guys realize it, but all of that ugly dusty junk in your shack can be replaced by a few lines of code from the App Store.  That room you used to call “the shack” can be converted into the Yoga studio or knitting room that your wife has been longing for!  Now you can carry your station with you wherever you go and autonomously participate in contests from stations around the world.  Imagine the thrill of learning that while you were playing golf or bowling, you were also WINNING a major DX contest from a “station” in Ulan Bator. And that ALL of your reports were 59!   It’s like owning your own ham radio drone!  Congrats old man.  YOU WON! Welcome to the 21st century! That’s the kind of operation we are going to explore on WireWrapRap!
For those of you who are worrying that we might be abandoning our microphones, have no fear my friends, Pete and I remain committed phone operators. Only now, it will be DIGITAL VOICE.   We’ll be squeezing our dulcet tones into a mere 800 Hz of bandwidth.  This way we both sound exactly the same.  Heck with this new technology everybody will sounds the same.  How cool is that!   We’ll all sound like a mix of Stephen Hawking’s synthesizer, Apple’s Siri, and MTV's Max Headroom.   The AM guys and the Enhanced SSB crew may need some time to get used to this, but c’mon fellas, it is time to get with it!  There will be no more need to tweak all those menus for “presence” and “brightness” and “mid-range.”   Heck no, we’ll all sound the same!  Progress my friends, PROGRESS!
As I said, I had my doubts about this.  But over the weekend I walked into the TV room and Elisa happened to be watching one of those “inspirational self-help” speakers on Direct TV, and you know what?  He made a lot of sense. Change IS good!  We have to EMBRACE the future!  Impossible = “I’m possible!”  Yea!  So thank you Deepak Chopra!  Thank you Pete Juliano!  And welcome --  all of you -- to the WireWrapRap!

41 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Sounds like a good mix of old and new technology. I look forward to the next podcast.

    ReplyDelete
  4. This comment has been removed by a blog administrator.

    ReplyDelete
  5. This comment has been removed by a blog administrator.

    ReplyDelete
  6. Finally! We can experience the JOY OF COMPILATION as we see "completed without errors".

    ReplyDelete
  7. In light of your announcement. I offer my services to remove all the offending valve/thermotronic items from your shack and and perform an exorcism of the hollow state spirits present.

    ReplyDelete
  8. This is fantastic news. Finally you are willing to admit that "Appliance" operation is the way to go.

    Perhaps you could now get yourself a G5RV and a Vanity Callsign!

    Have fun,
    Jon N5JLD

    ReplyDelete
  9. You have lost your ever loving mind! Glad I've down loaded all the previous podcast!

    ReplyDelete
  10. I too have taken a byte of the Apple PI and have fallen asleep under its curse. I think only a kiss from a biological entity with a true analog soul will allow me to recover.

    Good luck to you Bill, and Pete. May your lives continue as binary adherents. I think the sciences call that Bipolar personality?

    :<)

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. Is there a web page where we can certify that we are over 18 and read the removed comments?
    I am a CW minimalist, but want to learn Pi, so full speed ahead! (Actually R Pi is minimalist computing.) AC9DN

    ReplyDelete
  13. Great! I went and dug our my old manual wire wrap tool and wire spools and am anxious to get started! ;-) 73 - Dino KL0S

    ReplyDelete
  14. Hi Valve Timer,
    my guess is, that the removed comments wouldn't excite a twelf years old boy unless he's a a number or month-fetishist...
    Peter/DL3PB

    ReplyDelete
  15. This comment has been removed by a blog administrator.

    ReplyDelete
  16. This comment has been removed by a blog administrator.

    ReplyDelete
  17. This comment has been removed by a blog administrator.

    ReplyDelete
  18. In order to experience the full effect, be sure to hook up your digital audio to an ElectroVoice Rearaxial Softspeaker.

    ReplyDelete
  19. Operation Chilli Wave topped with Oregano and nuclear powered for QRO.... YES, time has come for a change!

    Well done Bill and Pete.... Throw out the Barbie qrp stuff... Wasn`t it a silly thing from the beginning on?

    No more 72s. From now on 73K! Well done and all the best for the ride to Mars. I look out for you guys. My Mighty Might will strike you.... but don't be fooled by the WireWrapRap (WWR-Mode) sTef DL1FDF

    ReplyDelete
  20. This comment has been removed by a blog administrator.

    ReplyDelete
  21. Ok, I'll bite. What the heck is a "soundcloud?"
    KF7JAF

    ReplyDelete
  22. I wonder if SNICKR performs better than WSPR? I'll Google for the software now...

    ReplyDelete
    Replies
    1. Hope I can make it through today without breaking down. Guess this change is appropriate since I have gone taken the plunge and gone DMR here in Beautiful Baja Oxnard. But what am I gonna do w/ my handle? "Crunch Digits"? Just doesn't have that 'ring'.

      73.......Steve Smith WB6TNL
      formerly "Snort Rosin"

      Delete
    2. This comment has been removed by a blog administrator.

      Delete
  23. This comment has been removed by a blog administrator.

    ReplyDelete
  24. Not surprised, really. Started my first Arduino after watching Pete's rigs. Planning a Teensy SDR. Looking forward to your new ground. Not ready for high energy physics on my bench yet.

    Ed, N5EM

    ReplyDelete
  25. This comment has been removed by a blog administrator.

    ReplyDelete
  26. This comment has been removed by a blog administrator.

    ReplyDelete
  27. This comment has been removed by a blog administrator.

    ReplyDelete
  28. Great idea. Soldersmoke was definitely getting stuck in a rut. I look forward to the first issue.

    Perhaps you could start off with an in-depth code analysis of one of the newer SDR radios as I'm very interested to understand more about this new Signal to Code Ratio (SCR) that I see banded about on some other blogs.

    ReplyDelete
  29. I can't believe how many upset comments were removed from this blog post by the administrator!! ;) This must be a record or something!! Best of luck Bill in the future of this Blog! DISCRETE COMPONENTS FOREVER!!!

    Jim
    KE8BHO

    ReplyDelete
  30. http://www.jameco.com/jameco/workshop/techtip/wirewrap.html

    ReplyDelete
  31. Looking forward to an Ardunio interface for your venerable DX-100, thanks

    ReplyDelete
  32. Looking forward to an Ardunio interface for your venerable DX-100, thanks

    ReplyDelete
  33. This comment has been removed by a blog administrator.

    ReplyDelete
  34. Tim Analog SprouseApril 3, 2016 at 2:31 PM

    Awh crap, now I'm going to have to unsolder all of the projects I have already started and rewrap all of the connections. I'm so depressed. I always knew that this digital crap would be the end of me! Digital is so bipolar! Basta

    ReplyDelete
  35. May April 1 always bless us in this manner... 73 de wa5wcp

    ReplyDelete
  36. You almost got me.... de N6LMX

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column