Podcasting since 2005! Listen to Latest SolderSmoke

Tuesday, November 25, 2014

Pete Builds a Michigan Mighty Mite


We have been distributing quite a few 3.579 MHz crystals, but until today we hadn't seen a single new Michigan Mighty Mite.   I commented on this in the last podcast.  Pete came to the rescue and built one: 

Hi Bill,
     The MMM was built – took me a long time (about 30 Minutes so it was kind of slapped together). The most time was consumed drawing squares on the sheet metal. I used a pill bottle cut down for the coil.
     Used a piece of Home Depot sheet metal for the based. I highly recommend a .01 Ufd from the 27 Ohm to ground –key clicks are awful.
     BTW the circuit can be modified so that the tuning cap is soldered to one side of the coil and the other side to ground –essentially the tank tuning cap is in series with the 0.05 bypass cap and is effectively across the coil. Tribal Knowledge
    The CLA lives on!
 Pete

VIVA EL EJERCITO DE LA LIBERACION DEL COLORBURST! VIVA EL CLA! 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

No comments:

Post a Comment

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column